Захранвания MEAN WELL

AC/DC

Enclosed Power Supply

• Miniature size, non-PFC
• High reliability, 5G vibration, 70℃ operation
• 300VAC input surge, all using 105℃capacitors
• Suitable for critical applications
• 2 outputs are isolated for RID series

• Economical non-PFC models
• Miniature size with complete protections
• Most economical models with complete safety certificates

• Non-PFC, complete protections
• Economical medium to high power models with safety certificate

• Built-in active PFC function
• Full range input, complete functions

• Built-in active PFC function (except for NEL series)
• Output voltage:
  • 2.5V, 3.6V, 3.8V, 5V for HSP series
  • 2.8V, 4V, 5V for NEL series
  • 2.8V / 3.8V for HDP series
• Suitable for high efficiency moving sign appication
• Conformal coating

• Output voltage programmable from 20~110%

• 1U low profile
• Built-in active PFC
• Fanless design

• Low profile with PFC function
• With complete functions for 750W~ 3000W
• Built-in parallel function for 1000W~3000W

• Built-in active PFC function
• High efficiency, no load power consumption<0.5W
• 5 years warranty

• Medical enclosed type, built-in active PFC
• Medical safety approved (MOOP level)
• High efficiency, no load power consumption <0.5W
• 5 years warranty

LED/LED Driver

TOP

• 90~295VAC input, built-in active PFC function
• Metal case, IP66 design for indoor or outdoor installations
• User adjustable
  • output voltage and current
  • level
• LED street lighting and outdoor LED lighting applications

• 90~295VAC input, built-in active PFC function
• Output current adjustable through output cable or internal potentiometer (CLG-150)
• Suitable for
  • LED street lighting, outdoor LED lighting and moving sign applications

• 90~305VAC input, built-in active PFC function
• 95% high efficiency
• Metal case, IP67/IP65 outdoorinstallations
• Built-in 3 in 1 dimming function
• (1~10VDC, PWM signal or resistance) for B type
• Suitable for
  • LED street lighting, outdoor LED lightingn and moving sign applications
• 5 years warranty

• 90~305VAC input, built-in active PFC function
• Constant current output with high output voltage >60VDC
• Metal case, IP67/IP65 design for indoor or outdoor installations
• Built-in 3 in 1 dimming function
• (1~10VDC, PWM signal, or resistance) for B type
• Suitable for
  • LED street lighting and outdoor LED lighting
• 5 years warranty

• Wide input range 180~480VAC for HVG(C)-100,
• 180~528VAC for HVG(C)-150
• Constant current output with high output voltage >60VDC for HVGC series
• Metal case, IP67/IP65 design for indoor or outdoor installations
• Built-in active PFC function
• Suitable for LED street lighting and outdoor LED lighting applications
• 5 years warranty

• 90~305VAC input, built-in active PFC function
• Rectangular metal case
• IP65 design for indoor or outdoor installations

• 90~305VAC input, built-in active PFC function
• Circular shape metal case
• IP65/IP67 design for indoor or outdoor installations
• Built-in 3 in 1 dimming function
• (1~10VDC, PWM signal, or resistance) for B type
• Suitable for LED high/low bay lighting, stage lighting and spot lighting
• 5 years warranty

• 90~295VAC input, built-in active PFC function
• High efficiency up to 93%
• U-bracket low profile: 33mm, suitable for built-in LED lighting systems

• Rectangular plastic case with IP30 level
• Low cost
• Constant voltage design (C.V. mode) for APV series
• Constant current design (C.C. mode) for APC series
• Suitable for indoor LED lighting

• Slim plastic case with IP67 level
• Economical design, low cost
• Withstand 300VAC surge input for 5 seconds
• -30~70℃ wide operation range
• Suitable for economical LED lighting and moving sign applications

• Fully isolated plastic case with IP64 level
• Optional dimming function: 1.1~10VDC(D type) or PWM(P type) controlled
• Suitable for economical LED lighting and moving signapplications

• AC phase-cut dimming, work with leading and trailing edge TRIAC dimmers
• Fully isolated plastic case with IP30 level
• Built-in active PFC function
• Class II design, without FG
• Suitable for indoor LED lighting

• Fully isolated plastic case with IP30 level
• Built-in active PFC function
• Class II design, without FG
• Suitable for indoor LED lighting

• Fully isolated plastic case with IP30 level
• Built-in active PFC function
• Class II design, without FG
• Push terminal I/O
• Suitable for indoor LED lighting

• Fully isolated plastic case with IP67 level (16W optional)
• Class II design, without FG
• Built-in active PFC function
• Built-in 3 in 1 dimming function(1~10VDC, PWM signal o resistance) for LPF-xxD
• Suitable for LED lighting and moving sign applications

• Fully isolated plastic case with screw terminal style of I/O
• Built-in active PFC function
• Suitable for indoor LED lighting and moving sign applications

• Fully isolated plastic case with IP64 level
• Built-in active PFC function
• Suitable for indoor LED lighting and moving sign applications

• Fully isolated plastic case with IP64 level
• Built-in active PFC function
• Built-in 3 in 1 dimming function(1~10VDC, PWM signal o resistance) for B type
• User adjustable output voltage and current level for A type
• Suitable for indoor LED lighting and moving sign applications

• 180~295VAC input, built-in active PFC function
• Fully isolated plastic case
• Multiple-stage C.C. level selectable by DIP S.W.
• Built-in 0~10VDC and PWM signal dimming function for LCM-40/60
• Built-in DALI interface and push dimming function fo LCM-40DA/60DA
• Suitable for indoor LED lighting applicaions

• Built-in active PFC function
• Suitable for built-in LED lighting systems

• Built-in active PFC function
• Built-in 3 in 1 dimming functio (1~10VDC, PWM signal or resistance)
• Suitable for built-in LED lighting systems

• Constant current output DC/DC LED driver
• High efficiency up to 97%
• Comply with EN55015 and FCC without additional an components
• Built-in PWM dimming and remote ON/OFF control
• Suitable for built-in LED lighting systems (Additional mother board is required)
• Pin, wire and SMD style for choice

• 20kA surge protection device
• Type 2 component assemblies
• Line to Ground & Line to Line protected
• Suitable for surge protection of LED drivers
• UL1449, TUV EN61643-11 approved

DIN Rail

TOP

• No load power consumption
• Assemble on industrial rail TS35 / 7.5 or 15
• Built-in active PFC and over temperature protection(MDR-100)
• DC OK signal output (MDR-10/20)
• DC OK relay contact (MDR-40/60/100

• Isolation class II
• No load power consumption <
• No load power consumption
• Assemble on industrial rail TS35 / 7.5 or 15
• Suitable for building automation and control of household appliances

• Fanless design
• Models over 240W(includes) built-in PFC function

• Fanless design
• Three phase or high input voltage range (340~550VAC)

• Slim design and high efficiency up to 94%
• Built-in active PFC function (except for SDR-75)
• Assemble on industrial rail TS35 / 7.5 or 15
• Built-in DC OK relay contact (except for SDR-75)
• 150% peak load capability (130% for SDR-960)

• Slim design and 340~550VAC high input range (three phase)
• High efficiency up to 94.5%
• Built-in active PFC function
• Assemble on industrial rail TS35 / 7.5 or 15
• Built-in DC OK relay contact

• Slim design and 180~550VAC wide input range(single and two phase)
• High efficiency up to 93%
• Built-in active PFC function (240W & 480W)
• Assemble on industrial rail TS35 / 7.5 or 15
• Built-in DC OK relay contact

Modular

TOP

• Free configuration, highly flexible, customized standard PSU
• Cover all output voltages from 1.6~53VDC
• Built-in active PFC
• Suitable for multi-output, complex equipment or systems

Rack Power

TOP

• 19″, 1U rack power unit
• RCP-MU / RKP-CMU1: Control and monitoring unit(Built-in I 2/ PMBus decoder)

Specific Purpose

TOP

• With UPS function (need external batteries)
• Suitable for security industry or battery backup systems
• PCB type: PSC series (case available)

• Low profile for 1U/2U for rack system
• Suitable for industrial PC applications

Open Frame Switching Power Supply

TOP

• Assemble on the main PCB of the system
• Medical safety approved (2xMOPP) for PM and NFM series
• Industrial safety approved for IRM series
• No load power consumption
• NFM – PCB type / PM – encapsulated typeIRM – miniature encapsulated type

• PCB type, non-PFC for small wattage models
• Multiple form factors for different installations:7”* 4.25”, 5”* 3”, 4”* 2”, slim type

• Compact PCB type, non-PFC for small wattag models(15W~65W)
• No load power consumption
• Suitable for ErP regulated end systems

• PCB type, non-PFC for small wattage models
• Medical safety approved (2xMOPP)
• Low leakage current suitable for non-patient contact medical equipments

External Switching Power Supply

TOP

• CE declaration only for models with active or passive PFC ifhigher than 150W
• No load power consumption
• Suitable for battery back up system, electrical wheelchair,electrical scooter, trailer, or general consumer electronicproducts

• Desktop style with safety certificates for main countries
• Need suitable power cord for different areas
• ErP step 2 compliant and meet EISA 2007 for GS series
• Triple output: P25/50
• DC plug changeable (MOQ may be required

• Wall-mounted style adaptor with safety certificates
• ErP step 2 compliant and meet EISA 2007
• Interchangeable type for GE series
• DC plug changeable (MOQ may be required)

• Medical safety approved(2xMOPP)
• ErP step 2 compliant and meet EISA 2007 for GSM family
• DC plug

• Medical safety approved (2xMOPP)
• No load power consumption<0.1W
• ErP step 2 compliant and meet EISA 2007 for GSM family
• 2 pole USA/Euro plug
• DC plug changeable (MOQ may be required)

DC/DC Converter

TOP

• On board module type, assemble on the main PCB of the system
• Single, dual, triple output models

• On board PCB type, assemble on the main PCB of the system
• Ultra-low profile
• 3:1 ~ 4:1 wide input range
• Non-isolated for NID series

• 2:1 wide input range
• CE declaration
• Built-in systems and low cost

• DC/DC converter with metal chassis
• Comply with EN50155 railway certificate for RSD family
• CE declaration
• Suitable for battery backup system or transportation vehicle

DC/AC Power Inverter

TOP

• External DC/AC inverter
• Modified sine wave output, suitable for resistive load
• Low cost

• 200W~3000W true sine wave
• High surge power up to 200%

• 1500W~3000W true sine wave with solar charger & b-passfunction
• High surge power up to 200%

• Remote controller for TS-700~3000 , TN-1500~3000